Shop By Category
- Home /
- Testing and Measuring Instruments /
- Electrical Power Testing /
- Digital Clamp Meter
Digital Clamp Meter
Showing 60 out of 455 products
Type of Product : Digital AC Clamp Meter
Type of Product : Digital AC Clamp Meter
Jaw Opening Size : 30 mm
Voltage Accuracy (AC) : 1.5 % ± 5 Digits
Operating Environment : 0° to 40°C
Storage Environment : -30° to 60°C
Type of Product : Digital Clamp Meter
Type of Product : Digital AC Clamp Meter
Display : 3½ Digits LCD Display
Display Counts : 2000 Counts
Jaw Opening Size : 32 mm
Type of Product : Digital Clamp Meter
Type of Product : Digital Clamp Meter
Type of Product : Digital Clamp Meter
Type of Product : Digital AC/DC Clamp Meter
Jaw Opening Size : 52 mm
DC Current Range : 0-1000 A
Dimension : 270x123x50 mm
Max. DC Current Range : 601-1000 A
Maximum Voltage Range (DC) : 601-1000 V
Max. AC Current Range : 601-1000 A
Maximum Voltage Range (AC) : 601-750 V
Senser : True RMS
Storage Environment : -40° to 60°C
Dimension : 270x90x70 mm
Counts : 3999
Digit : 3¾
Country of Origin : India
Measuring Accuracy (Typical) : CAT III
Type of Product : Digital Clamp Meter
Display : 43mm x 45mm
Voltage Range (AC) : 1000 V
Capacitance Range : 60mF Accuracy: ±(4%+5)
Power : 1.5V battery x 3
Dimension : 272x81x43.5 mm
Duty Cycle : 10%~90% Accuracy: ±(2.6%+7)
Resistance Range : 60MΩ Accuracy: ±(1%+2)
Voltage (AC) : 1000V Accuracy: ±(1.2%+3)
Voltage (Dc) : 1000V Accuracy: ±(0.5%+5)
Frequency Range : 10Hz~1MHz Accuracy: ±(0.1%+3)
Accessories : Test leads, batteries, point contact temperature probe, Manual
Type of Product : Digital AC/DC Clamp Meter
Display : 3¾ Digits LCD Display
Display Counts : 4000
Jaw Opening Size : 23 mm
Voltage Range (DC) : 400 mV-1000 V
Voltage Range (AC) : 400 mV-750 V
Dimension : 183x43x31 mm
Type of Product : Digital AC Clamp Meter
Display : 3¾ Digits LCD Display
Display Counts : 4000
Jaw Opening Size : 26 mm
Voltage Range (DC) : 400 mV-600 V
Voltage Accuracy (DC) : ±(1.0 % + 4 Digits)
Current Range (AC) : 0-600 A
Current Accuracy (AC) : ±(1.5 % + 8 Digits)
AC Current Resolution : 10 mA / 100 mA / 1 A
Voltage Range (AC) : 0-600 V
Voltage Accuracy (AC) : ±(2.0 % + 5 Digits)
Resistance Accuracy : ±(2.0 % + 4 Digits)
Capacitance Range : 500 nF-3000 µF
Capacitance Accuracy : ±(3.5 % + 6 Digits)
Frequency : 10 Hz-2 kHz
Frequency Accuracy : ±(0.5 % + 4 Digits)
Power : Single 3 V Coin Battery
Operating Environment : 0° to 40°C
Storage Environment : -20° to 60°C
Relative Humidity : < 80% RH
Weight : 139 g
Dimension : 190x63x32 mm
Maximum Voltage Range (DC) : 0-600 V
Max. AC Current Range : 401-600 A
Maximum Voltage Range (AC) : 0-600 V
Resistance Range (Ohm) : 0-40 MΩ
Type of Product : Digital AC/DC Clamp Meter
Jaw Opening Size : 50 mm
DC Current Range : 0.1-1000 A
Current Accuracy (DC) : ±(1.5 % + 4 Digits)
Voltage Range (DC) : 0.001-600 V
Voltage Accuracy (DC) : ±(0.3 % + 3 Digits)
Current Range (AC) : 0.1-800 A
Current Accuracy (AC) : ±(1.5 % + 4 Digits)
AC Current Resolution : 0.1 A / 1 A
Voltage Range (AC) : 0.001-600 V
Voltage Accuracy (AC) : ±(1.0 % + 4 Digits)
Resistance Accuracy : ±(0.6 % + 4 Digits)
Capacitance Range : 0.1 nF-3000 µF
Capacitance Accuracy : ±(3.5 % + 6 Digits)
Max. DC Current Range : 601-1000 A
Maximum Voltage Range (DC) : 0-600 V
Max. AC Current Range : 601-1000 A
Maximum Voltage Range (AC) : 0-600 V
Resistance Range (Ohm) : 0.1-40 MΩ
Type of Product : Digital AC/DC Clamp Meter
Display : 3¾ Digits LCD Display
Display Counts : 4000
Jaw Opening Size : 40 mm
DC Current Range : 0-1000 A
Current Accuracy (DC) : ±(2.0 % + 5 Digits)
Voltage Accuracy (DC) : ±(1.0 % + 2 Digits)
Current Range (AC) : 0-1000 A
Current Accuracy (AC) : ±(2.0 % + 5 Digits)
AC Current Resolution : 0.1 A / 1 A
Voltage Accuracy (AC) : ±(1.5 % + 5 Digits)
Resistance Accuracy : ±(2.0 % + 5 Digits)
Capacitance Range : 40 nF-100 µF
Capacitance Accuracy : ±(2.0 % + 4 Digits)
Frequency Accuracy : ±(0.5 % + 3 Digits)
Max. DC Current Range : 601-1000 A
Maximum Voltage Range (DC) : 601-1000 V
Max. AC Current Range : 601-1000 A
Maximum Voltage Range (AC) : 601-750 V
Resistance Range (Ohm) : 0-40 MΩ
Senser : True RMS
Display Counts : 6000
Jaw Opening Size : 32 mm
Current Range (AC) : 0-600 A
Current Accuracy (AC) : 2 % ± 5 digits
AC Current Resolution : 0.1 A
Voltage Range (AC) : 0-600 V
Voltage Accuracy (AC) : 1.0 % ± 5 digits
Resistance Accuracy : 1.0 % ± 5 digits
Capacitance Range : 10-1000 μF
Capacitance Accuracy : 1.9 % ± 2 digits
Power : 2 AA, NEDA 15A, IEC LR6
Operating Environment : -10 °C to +50 °C
Storage Environment : -40 °C to +60 °C
Relative Humidity : ≤ 90 % RH (at 10 °C to 30 °C)
Weight : 370 g
Dimension : 232x85x45 mm
Audible Continuity : ≤ 30 Ω
Type of Product : Digital Milliamp Process Clamp Meter
Operating Environment : -10° to 50°C
Storage Environment : -25° to 60°C
Type of Product : Digital Clamp Meter
Dimension : 270x90x70 mm
Model No : RISH Clamp 1000A AC/DC
Counts : 3100
Current (AC/DC) : 1000 A AC/DC
Phase : Three Phase
Digit : 3¾
Country of Origin : India
Measuring Accuracy (Typical) : CAT IV
Type of Product : Digital Clamp Meter
Dimension : 270x90x70 mm
Model No : RISH Clamp 300A AC/DC
Counts : 3100
Current (AC/DC) : 300 A AC/DC
Phase : Three Phase
Digit : 3¾
Country of Origin : India
Measuring Accuracy (Typical) : CAT IV
Type of Product : Digital Clamp Meter
Dimension : 270x90x70 mm
Counts : 3100
Digit : 3¾
Country of Origin : India
Measuring Accuracy (Typical) : CAT IV
Type of Product : Digital AC/DC Clamp Meter
Type of Product : Digital AC Clamp Meter
Display Counts : 4000
Jaw Opening Size : 57 mm
Voltage Accuracy (DC) : ±(1.0 % + 3 Digits)
Current Accuracy (AC) : ±(2.5 % + 5 Digits)
Voltage Range (AC) : 0-750 V
Voltage Accuracy (AC) : ±(2.5 % + 5 Digits)
Resistance Accuracy : ±(1.5 % + 3 Digits)
Frequency Accuracy : ±(1.0 % + 3 Digits)
Power : One 9 V Battery
Operating Environment : 5° to 40°C
Storage Environment : -20° to 60°C
Relative Humidity : < 80% RH
Maximum Voltage Range (AC) : 601-750 V
Resistance Range (Ohm) : 0-40 MΩ
Type of Product : Digital AC Clamp Meter
Display : 3½ Digits LCD Display
Display Counts : 2000
Jaw Opening Size : 30 mm
Current Range (AC) : 0-1000 A
Operating Environment : 5° to 40°C
Storage Environment : -20° to 60°C
Relative Humidity : < 80% RH
Weight : 303 g
Dimension : 229x80x49 mm
Maximum Voltage Range (DC) : 0-600 V
Max. AC Current Range : 601-1000 A
Maximum Voltage Range (AC) : 0-600 V
Type of Product : Digital AC/DC Clamp Meter
Display : 3¾ Digits LCD Display
Display Counts : 4000
Jaw Opening Size : 30 mm
DC Current Range : 0-1000 A
Voltage Range (DC) : 400 mV-600 V
Current Range (AC) : 0-1000 A
Voltage Range (AC) : 400 mV-600 V
Operating Environment : 5° to 40°C
Storage Environment : -20° to 60°C
Relative Humidity : < 80% RH
Weight : 303 g
Dimension : 229x80x49 mm
Max. DC Current Range : 601-1000 A
Maximum Voltage Range (DC) : 0-600 V
Max. AC Current Range : 601-1000 A
Maximum Voltage Range (AC) : 0-600 V
Resistance Range (Ohm) : 0-40 MΩ
Page 1 of 8 results
Ships within 24 hrs
Ships within 24 hrs
Ships within 24 hrs
Ships within 5 days
Ships within 24 hrs
Ships within 24 hrs
Ships within 24 hrs
Ships within 5 days
Ships within 24 hrs
Ships within 24 hrs
Ships within 24 hrs
Ships within 24 hrs
Ships within 24 hrs
Ships within 24 hrs
Ships within 24 hrs
Ships within 5 days
Ships within 24 hrs
Ships within 24 hrs
Ships within 24 hrs
Ships within 24 hrs
Ships within 5 days
Ships within 7 days
Ships within 2 days
Ships within 7 days
Ships within 3 days
Ships within 2 days
Ships within 2 days
Ships within 24 hrs
Ships within 6 days
Ships within 7 days
TOP SELLING DIGITAL CLAMP METER PRICE LIST
| Product Name | Expected Price | Dispatch Time | Discount |
|---|---|---|---|
| KUSAM-MECO 2790 Digital AC Clamp Meter 600 A 750 V | ₹3,699 | 24 hrs | 12.92% OFF |
| Mextech DT36T AC/DC True RMS Digital Clamp Meter | ₹2,699 | 24 hrs | 6.91% OFF |
| Fluke 302+ Digital AC Clamp Meter 400 A 600 V | ₹9,499 | 24 hrs | 12.5% OFF |
| Fluke 362 Digital AC/DC Clamp Meter 200 A 600 V | ₹8,899 | 24 hrs | 17.13% OFF |
| Hioki 4.199 V to 600 V Ac Clamp Meter-3280-10F | ₹5,699 | 6 days | -- |
| Meco 27-Auto BL Digital AC Clamp Meter 400 A 600 V | ₹1,399 | 24 hrs | 13.33% OFF |
| Rishabh Rish Clamp ES 400 Digital AC Clamp Meter 400 A 1000 V | ₹3,199 | 3 days | 20.5% OFF |
| Metrix+ 1250A Digital AC Clamp meter 1000 A 700 V | ₹2,999 | 6 days | -- |
What is a Digital Clamp Meter?
Also known as a digital clamp multimeter, it is one kind of testing and measurement tool. It is an electronic testing instrument that is used to measure electrical current in a circuit. It is a non-contact testing tool that measures the current flowing through a wire by clamping around it, without requiring the wire to be disconnected.
A clamp meter consists of two jaws that can be opened and closed, which are used to clamp around the wire. The jaws contain a magnetic sensor that detects the magnetic field created by the current flowing through the wire. This signal is then converted into a digital reading on the meter display.
Benefits of Digital Clamp Meters
a) They can measure both AC (alternating current) and DC (direct current) currents, and some models can also measure other electrical parameters such as voltage, resistance, and frequency.
b) Electricians, technicians, and DIY enthusiasts commonly use them to measure current in circuits, test the performance of motors and generators, and troubleshoot electrical problems.
c) They are preferred over traditional analog clamp-meters as they provide more accurate readings, have better resolution, and are easier to use.
d) They are also equipped with additional features such as data logging, temperature measurement, and backlit displays, making them versatile and essential tools for electrical testing and measurement.
Purchase this product and enjoy all the advantages mentioned above, unlike non-electrical properties testing products.
How do they work?
Their work can be explained in the following steps:
1. Jaw Opening:
a) The jaws of the clamp testers are opened and positioned around the wire carrying the electrical current.
b) The jaws are designed to open wide enough to accommodate the wire, and their position is adjusted to ensure proper contact with the wire.
2. Detection of magnetic field:
a) Once the jaws are closed around the wire, the magnetic sensor inside the jaws detects the magnetic field produced by the electrical current flowing through the wire.
3. Conversion of signal:
a) The magnetic field signal is converted into an electrical signal, which is then processed by the meter's internal circuitry.
4. Display of reading:
a) The processed signal is displayed on the meter's digital display screen as a numerical value, which indicates the current flowing through the wire in amperes (A).
Some models of meters also have additional features such as measurement of voltage, resistance, frequency, temperature, and continuity. It is important to note that clamp meters should be used correctly and safely, and the user should be familiar with the specific features and limitations of the meter being used. The user should also follow all safety precautions and guidelines, as electrical currents can be dangerous and potentially lethal.
Uses of Digital Clamp Meters:
They are versatile and essential tools for electrical testing and measurement, and are commonly used in a variety of applications by electricians, technicians, and DIY enthusiasts. Some of their uses include:
1. Measuring current in circuits:
a) They are primarily used to measure the electrical current flowing through a wire or circuit.
b) They can measure both AC and DC currents, and can be used to troubleshoot electrical problems, test the performance of motors and generators, and verify circuit loads.
2. Measuring voltage:
a) Many digital clamp-meters also have a voltage measurement function, which can be used to measure AC or DC voltage levels in a circuit.
b) This can be useful in identifying faulty or damaged components, or in checking the voltage level of batteries and other electrical devices.
3. Measuring resistance:
a) Some digital meters have a resistance measurement function, which can be used to measure the resistance of a circuit or component.
b) This can be useful in diagnosing faults in circuits or in testing the performance of resistors and other components.
4. Measuring frequency:
a) Some of them can also measure the frequency of an electrical signal.
b) This can be useful in troubleshooting electronic devices or in testing the frequency of power sources.
5. Measuring temperature:
a) Some meters have a built-in temperature sensor, which can be used to measure the temperature of electrical components or other objects.
b) This can be useful in diagnosing overheating issues or in testing the performance of temperature-sensitive components.
Overall, they are versatile and essential tools for electrical testing and measurement, and their ability to measure current, voltage, resistance, frequency, and temperature makes them useful in a wide range of applications.
What is a clamp tester?
Also known as a clamp-on ground resistance tester or clamp-on earth tester, it is an electronic instrument used to measure the resistance of grounding systems or earth electrodes without disconnecting them. It is designed to measure the resistance of a grounding system by clamping around the ground conductor or electrode, and measuring the current flowing through it. Explore our website - Industrybuying and come across a range of products from top international brands such as measuring & surveying equipment - made In Japan.
Top Selling Brands at Industrybuying.com
Here is the list of top selling brands at Industrybuying. You can check a wide range of digital clamp meter prices in testing and measurement instruments offered by each brand as per your requirement and budget. Don’t forget to list out your needs before choosing a product.
a) Fluke
b) Kusam Meco
c) Extech
d) Meco
e) HTC
f) Zoyi
g) Mastech
h) Mextech
i) Vartech
j) Meco -G
Why Choose Industrybuying?
If you are looking for a product that is cheaper and reasonable across PAN India then ou have landed to the right place. Industrybuying deals in 40+ categories and more than a million of products. We are known in the market for reasonable digital clamp meter price, excellent service and exceptional delivery. We have several brands with multiple products with huge variety of current range, display count and from least price to higher pice.
Industrybuying is a popular online platform that offers a wide range of industrial products, weighing scales and systems and related items to its customers. The company strives to ensure a top-notch shopping experience for its clients, providing various payment options and nationwide delivery services. In addition, eligible orders may qualify for free shipping and delivery across India.
Frequently Asked Questions:
1. Which is the best digital clamp meter?
* Meco
* Fluke
At Industrybuying, you can find an array of AC DC clamp meters manufactured by well-known brands such as Waco, Uni-T, Proskit, Mastech, Rishabh, Motwane, and more.
2. What should I look for in a clamp meter?
* First and foremost, check the current minimum and maximum levels that the meter can measure accurately.
* Secondly, look at the safety installation category rating, which indicates the level of protection the meter provides against electrical hazards.
* It is also crucial to ensure that the meter's resolution and accuracy are sufficient to measure the minimum level of current you require with precision.
* It is also important that you consider the clamp meter price so that you can have a better understanding of its features, working and prices accordingly.
* Finally, take note of the maximum conductor size that the clamp can accommodate, as well as the size of the access jaw. These factors can impact the meter's usability and suitability for your specific application.