How To Use a Drill Machine: A Step-by-step Guide
Last Updated on July 3, 2024 by IB-ADMIN
Drill machines are one of the saviour tools for the technicians who devoted their lives to constructing and designing things. It is a powerful yet potential tool when you have to make a perfect hole to hang in a photo frame or make space for fixing nuts and bolts. If you are a technician, having a Drill Machine in your toolbox is vital to getting your work done. But if you are not and willing to learn its importance, you have come to the right place.
Here you can read on Drill Machine as a time-saving tool to make holes anywhere you want. The best thing about the Drill Machine is that if you know the trick right, it will give you accurate holes to pin down anything you want to hang. This must be a small help, but yes, very helpful to get a thing done in one attempt only. The composition of the drill machine comes in various shapes and sizes, along with different drilling bits.
Though it is easy to use, you have to be cautious every time while using the Drill Machine. It is always wise if you use machines with all the safety measures. For example, arms should be properly aligned to hold the Drill Machine. Secondly, there should be adequate focus to drill in the right direction.
The use of Drill Machines specifically comes in construction projects. This machine helps you make holes on hard surfaces like concrete, plastic, wooden, metal or rocks. Sometimes, it is also used for completing the task at home as well.
How to use the Drill Machine safely?
Knowing how to use a Drill Machine is essential, if you are a beginner, it will keep you conscious and avoid any mishappening or injuries. For that, down below are the steps which will help you to guide in using the Drill Machine safely;
1. You Must Wear Safety Clothing and Eye Protection
You must have known that there is a dress code for everything because it keeps you alert that you are on a particular job and entitled to perform a task. The most important reason to wear safe clothing is to avoid interruptions when using the drill machine.
2. Wear the Mask for Lung Protection
Protecting your respiratory organ is very important if you are drilling a brick or concrete. It exposes a high amount of crystalline silica dust that may hamper silicosis and cause respiratory disease. It is advised to use a respirator mask depending on the project’s requirement. This safety is essential because that keeps you safe from dust infection.
3. You Must Pick the Correct Drill Bit
Using a Drill Machine as a beginner is pertinent to knowing the proper process. This will build your confidence with tools and make you a professional in using the Drill Machine. There are doubts people come across where they want to know how to use the drill machine with screw in the right way as they fail to perform correctly. The first step for it is select the right bit for Drill Machine i.e. a bit set is a must. If you are drilling a hole for a screw, the right way is to hold the screw up directly behind the bit. But make sure that the screw thread should be visible on both sides. Specifically for safety measures:
- Make sure that the drill is cordless combi or corded
- Check the weight of the power Drill Machine
- The drill should be easy to operate
4. Fix the Drill Tightly into the Chuck
The chuck helps to hold the bit in place when it’s spinning. To change the drill bit, ensure its power button is off. It is essential to check that the bit is straight and secure and remove the key only when turning off the Drill Machine. Here is one thing you must remember: each chuck should be large and smaller than the shaft drill.
5. Bring the Wooden Pieces Together
Now is the most crucial step where you have to begin the process of drilling. You have to place a wooden plank drill, mark the holes and switch on the power button to drill. Be cautious when you use the Drill Machine. To do it safely, you must not hold it loosely and do not keep it on the edge of the table; it may fall due to heavy pressure.
6. Make a Good Grip on the Cord
When using the corded drill, you must not leave the cord stretched across the pathway when you are not using the drill. If you are using the drill in a wet or muddy area, you must use the cordless drill instead. Do not chain multiple extension cords together or use an adaptor to plug a three-pong cord into a two-prong area.
7. Clean Up the Area
To make correct holes in the wall, you must have the right screws with you. Different bits, screws, and the Drill Machine can mess up the working area. So, after every use, you must clean up the area and keep the things back in their place. This will keep everything organized and make you read to use it for the next time.
Which are the safety measures while using a Drill Machine?
1. Make Pilot Holes First
To get the perfect holes on the first attempt and work as a beginner, you must start with a smaller drill bit. When that drill is successfully and you get a perfect hole, you can switch to the large size to complete the task. You start with another smaller hole in the beginning to avoid any mishappening or injury.
2. Put Steady Pressure
You need to understand that you must drill with firm pressure. If you cannot make a steady pressure, you must be using the wrong bit or it is not fixed properly. Giving any extra force may spoil the finishing of the hole.
3. Do Not Over-Heat
Check whether the Drill Machine is not overheated on doing the task. Sometimes too much drilling in one go can overheat the machine, which can be dangerous. You have to be very cautious about it and use the Drill Machine carefully.
4. Do Not Force A Jammed Bit
Do not force do anything; it will spoil your work. If the bit gets stuck while drilling in the wall, you must stop immediately. You must power off the drill machine and separate them patiently; otherwise, it will spoil the work or you might get hurt.
Therefore, the pointers mentioned above are essential when using the for the first time.
A drill machine is a powerful tool to complete construction or repairing tasks. If you are a regular user, you must be knowledgeable to handle the machine and bits safely. Understanding safety will make you a professional in using the tool itself, which makes your work done with ease. You must have a quality drill machine easily available at Industrybuying.