Top 7 Must-Have Hand Tools for Your Computer Hardware Repair Kit

Computers are a necessity everywhere; from homes to offices, schools, colleges, hospitals, banks, railway stations, etc, computers have become an indispensable part of all spheres of our lives. There are a plethora of hand tools available in the market and online today. Hand tools enable you to perform manual jobs quickly and efficiently. Choosing the right set of hand tools for your computer repair kit is crucial to getting you through a large number of hardware malfunctions very easily and swiftly.

Best Hand Tools for Your Computer Hardware Repair Kit

Find below the seven must-haves that we’ve picked from a diverse number of hand tools available online for your computer hardware kit.

#1 Flat-Tip Screwdrivers

Flat-tip screwdrivers are flat-headed and used to turn slotted screws. Buy the Taparia Flat Tip Screwdriver or the JK Files Flat Tip Screw Driver.

#2 Philips-Head Screwdrivers

Philips-head screwdrivers are the ones that are used to tighten or loosen screws that are cross-headed.

#3 Torx Screwdrivers and Nut Drivers

Torx Screwdrivers are used to fasten or loosen screws that have star-shaped depression; these screwdriver tips have a firmer grip and do not slip out that easily whilst fastening. Of late, Torx screwdrivers are used to tighten or unscrew almost all laptop fittings.

Nut drivers, which are similar in appearance to a screwdriver, are an essential part of the computer repair toolkit. They are used to fasten bolts and nuts of varied dimensions. They possess a hollow shaft that empowers them with a stronghold of the threaded nut.

You could use the Focus Nut Driver or the Wera Werk Nut Driver to fasten or loosen your nuts and bolts quickly. You could also make use of the JE tech Toll Nut Driver which comes with a soft grip to tighten your nuts.

#4 Wire Cutters

Wire cutters are helpful in stripping and cutting wires as per one’s need. Grab the Ambika Heavy Duty Wire Rope Cutter to snip your wires.

#5 Needle-Nose Pliers

Needle-nose pliers provide cutting and holding functionalities to the user. They are useful especially in hardware and electronics repair; because of their pointed needle-like tip, they come in handy if a nut or an element has become stuck in an otherwise unreachable cranny of the motherboard.

#6 Wire Strippers

Wire Strippers are pliers that help in stripping the wire off its insulation. A wire is generally coated with a covering of insulating material. If the situation demands, the wire has to be stripped-off of all its insulating covering to use it, say as a connector or a cable. A wire stripper consists of a pair of blades that function as a pair of scissors does.

#7 Crimpers

Crimping tools or crimpers are used to connect wires in such a manner that they are able to transmit data. Two wires are joined together with the help of a crimping tool by deforming either one or both of the wires. Every single one of the wires to be conjoined is first placed in the connector jack and then squeezed and held together to form a uniformly conducting wire.

Final Note About Hand Tools for Computer Hardware Repair Tool Kit

These are some of the entire lists of most common and popular hand tools which you can use to repair your computer hardware and makes it run without any errors. In case, you know any other tools for repairing the computer’s internal hardware, then please share them with IndustryBuying.com via below comment section. Also, share this article on social media sites so that others can also take the benefits of these top hand tools in the industry.